Rivo NEO N300 MT6261 Firmware Flash File Free

Rivo NEO N300 MT6261 Firmware Flash File

Rivo NEO N300 MT6261 Firmware Flash File

Rivo NEO N300 MT6261 Firmware Flash File Free
Operation : Read Flash [ v1.19 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )
Wait for phone…
Phone found! [ 30 ]
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 16980B7BF915894B8BCF3A9379F91747
BROM Protocol Version : 05
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000
[0] : FLASH_LEN : 0x00800000
SDS : 0x007FE000 , 0x00002000
Reading Flash Conent now …
Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : FARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.61A_X12_MD_P01_V13.bin
FileVersion : 61A_X12_MD_P01_V13
Saved to : C:\InfinityBox\CM2MTK\Read_out\FARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.61A_X12_MD_P01_V13.bin
Elapsed: 00:00:31
Reconnect Power/Cable!

How To Flash Firmware

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Your phone must have 50 % charging before this process
  4. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  5. Now open SPflash tool.exe
  6. When sp flash tool open, go to download button in sp flash tool
  7. In download tab, click on scatter load button
  8. After locating the scatter tab, click on the download button
  9. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  10. Now flashing is completed, a green ring will appear in sp flash tool
  11. Close sp flash tool on your computer and unplug phone
  12. Power on the phone and enjoy
Download Link

No comments:

Powered by Blogger.