Lenovo Z90-7 Vibe Shot Android 5.1 Firmware

Lenovo Z90-7 Vibe Shot Android 5.1 Firmware Flash File
Lenovo Z90-7 Vibe Shot Android 5.1 Firmware Flash File

First Step for Installing Rom

How To Flash ROM Lenovo Z90-7 Vibe Shot

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  3. There should be the device called in device management:
  4. Qualcomm HS-USB QDLoader 9008 (COMXX)
  5. In any other case, you have to install drivers manually.
  6. Run QFIL.
  7. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  8. Load XML in Download Section:
  9. First select RawProgram File: rawprogram0.xml
  10. then Select Patch File: patch0.xml
  11. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  12. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait


Download Link


No comments:

Powered by Blogger.