qmobile Z8 Plus [ROM] Miui V6 – Wiko Ridge Fab 4g

qmobile Z8 Plus [ROM] Miui V6 – Wiko Ridge Fab 4g/

qmobile Z8 Plus [ROM] Miui V6 – Wiko Ridge Fab 4g/

qmobile Z8 Plus [ROM] Miui V6 – Wiko Ridge Fab 4g

Prerequisites for Installing Rom on qmobile Z8 Plus

  • Download and install QPST 2.7.422 with QFIL
  • Download and install Qualcomm USB Drivers.

How To Flash ROM qmobile Z8 Plus

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. See detailed Instruction MT flashing sp tool with images


2 comments:

  1. Where is a Scatter file in the zip.
    this is a OTA update file.

    ReplyDelete
  2. Please Check again it contains flasher. Thanks Regards www.smartphonefirmwares.com
    how ever Sorry for the fake Discription

    ReplyDelete

Powered by Blogger.