Huawei Ascend G615-U10 Android Jellybean 4.3 Firmware

Huawei Ascend G615-U10 Android Jellybean 4.3 Firmware Flash File

Huawei Ascend G615-U10 Android Jellybean 4.3 Firmware Flash File


Huawei Ascend G615-U10 Android Jellybean 4.3 Firmware Flash File

How To ROM install Huawei Ascend G615-U10

  1. Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 4Gb
  2. Formatting SD card (optional).
    copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
  3. Check the root directory of the SD card you dload UPDATA.APP.
  4. SD card into the phone is switched on in the main screen, press the Menu key, the system
  5.  SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
  6. The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart or
    Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is
    recommended that more than 1G.
  7. Formatting SD card (optional). copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
  8.  Check the root directory of the SD card you dload UPDATA.APP
    Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure
  9. After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.
  10. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait

No comments:

Powered by Blogger.