QMobile LT250 / Wiko Wax firmware

QMobile LT250 / Wiko Wax firmware | flash file

QMobile LT250 / Wiko Wax firmware | flash file

QMobile LT250 / Wiko Wax firmware | flash file
 Note:
LT-250 and Wiko Wax Both Have N-vedia Chip And Same Spec Same Firmware

How To Install QMobile LT250

1. install drivers
2. install kikat installer
3. open shorcut from desktop
4. connect mobile in download mode
5. Power off then hold Volume Plus button & insert usb cable
6. press download button
1:  turn on the phone
2: Connect the phone via USB to the computer by holding down the Top Flight (APX connection mode: black screen)
3: Open CMD command prompt in administrator in the directory Decompression Pack
Note : To open command prompt in administration mode, open the folder where you unpacked cwm-recovery-zip, now press & hold SHIFT key on your keyboard and then right click anywhere in the folder and select “command prompt”)
4: In CMD, type:
CODE: SELECT ALL
nvflash.exe –bct common_bct.cfg –bl bootloader.bin –go
5: At the end of the scrolling instructions, type:
CODE: SELECT ALL
nvflash.exe -r –download 15 recovery.img
6: Press the button quickly Vol Up until the phone restarts! You are now in recovery mode with CWM

 WIKO WAX KitKat_V12

1 comment:

  1. This is a very useful post and Thanks for sharing with us. Good to know, Keep up the good writing.

    ReplyDelete

Powered by Blogger.